Are you looking for a way to get water sealant off a glass window? If so, then you’ve come to the right place. After getting a new glass window, we often come across water sealant on them after some time. Doesn’t it look awful? Well, no more!
A water sealant keeps the glass free of mineral deposits and prevents beading water. It is most commonly used on glass windows of houses and cars.
When this applied sealant turns milky white, it hinders visibility; hence its removal is necessary.
Water sealant removal may look like a hard task, but it is relatively easy. All you need is to:
- Use nail polish remover on a cotton ball.
- Use a vinegar and water mixture and a lint-free cloth.
- And if both methods don’t work, use a hairdryer and putty knife to rub off the nasty water sealant from your glass windows.
This blog post will show you how to remove water sealant quickly, easily, and non-destructively through the abovementioned methods. All you need is a little patience and some elbow grease.
Method 1: Using Nail Polish Remover and Cotton
The first method to remove water sealant is using nail polish remover and a small cotton ball. You need to follow these steps:
- Soak a cotton ball in nail polish remover and apply it to the sealant.
- Let it sit for a few minutes.
- Rub off the loosened sealant with a clean paper towel.
Use any window glass cleaner afterward to make it shine like new.
Method 2: Using Vinegar
The second method to remove glass sealant is using vinegar and water. Here is what you need to do:
- Mix equal parts vinegar and water in a spray bottle.
- Spray it onto the sealant and let it sit for a few minutes.
- Clean the vinegar and water solution with a clean paper towel.
Make sure to spray and clean with window glass cleaner afterward for an extra shiny look.
What To Do if the Sealant Won’t Come Off?
If the sealant doesn’t come off using the methods mentioned above, don’t worry. We’ve got you covered. To remove tough water sealant, use a hairdryer to warm it up. After it becomes soft, use a putty knife to scrap it off the glass window.
Be careful while scrapping the sealant off with the putty knife.
The improper use of the putty knife can void the window warranty. And aggressive use may lead to permanent scratches on glass.
How To Prevent Water Sealant From Ruining Your Beautiful View Outside the Window?
While trying to remove water sealant from a glass window, taking precautions is important to prevent the sealant from ruining your beautiful view outside the window. Here are some tips:
- Remove as much sealant as possible with the abovementioned methods or a putty knife.
- Clean the area with a glass cleaner and especially a lint-free cloth. (Lint-free cloth doesn’t leave any residue.)
- Apply a fresh layer of good-quality sealant and smooth it out evenly.
- Allow the sealant to dry completely before using the window.
Always use high-quality sealant to ensure it lasts longer, so you don’t have to remove it often.
Conclusion
So, now you know how to efficiently get water sealant off a glass window, which is pretty easy. These methods don’t require any expert help and are cheap. Nail polish remover, as well as vinegar, is common and can be found easily.
Make sure to use every method with precautions, as methods including nail polish remover (acetone) may cause nausea.
The putty knife should be used carefully, as it can cut easily. Other than this, these were the most effective methods to remove the sealant without needing expert help.
Frequently Asked Questions
How Vinegar Removes Sealant?
The vinegar and sealant contain acetic acid as their chemical formula. Hence, vinegar can be used as a solvent to clean water sealant. It softens the water sealant, which can be removed easily afterward.
What Is the Average Life of a Water Sealant?
It depends on the quality of the sealant. A good sealant will last up to 3 or 4 years. The low-quality ones may end up getting milky after 6 or 7 months.
